Ericsson AVP 1000 Reference Manual page 124

Front Panel Control
4.3.1.1.1 Title Bar
Alternately displays the current location within the menu tree and the recently loaded
configuration. If the loaded configuration was changed in any way, the '(changed)'
string is appended to the name.
4.3.1.1.2 Icons
The icons allow the user to determine the current state of the AVP 3000 at a glance.
The icons available on the main screen are shown in Table 4.3.
Table 4.3 Main Screen Icons
Icon
SCRAMBLED
4.3.1.1.3 Active Area
The active area is used for:
•
•
•
•
4.3.1.1.4 Audio Monitor
A selected audio input can be monitored. To select an audio input for constant
monitoring, navigate to Unit Config/Display Setup/Audio Monitor Input and set
the slot and channel parameters.
4-8
Off Air
On Air
CLEAR
Displaying the IP address and status information about the active streams
Displaying the Satellite Modulator parameters (AVP 3000 only)
Displaying the menu system
Displaying parameter setting
Description
Output Power Modulation State
Irrelevant Irrelevant
Moderate Off
High Off
Moderate On
High On
Either of Output State or Modulation State is Off or the Current State of the
satellite modulator Transport Stream is not Online.
Both Output State and Modulation State are On and the Current State of the
satellite modulator Transport Stream is Online.
No service in an enabled Modulator Transport Stream output is BISS or RAS
encrypted
At least one service in an enabled Modulator Transport Stream output is BISS or
RAS encrypted
Output State
Off
On
On
On
On
EN/LZT 790 0023/1 R16A