Ericsson AVP 1000 Reference Manual page 277

Parameter Values
AFD Action on Pass Through, Code as 0000
Reserved Codes
Closed Captions
Closed Captions Off, VBI lines, SMPTE334
Source
Timecode
Off, External, Zero on Loss, External, Freewheel
TC Mode
on Loss, Internal
TC External Source Auto, ANC VITC1, ANC VITC2, ANC LTC, VBI
TC Dropframes Off, On, Auto
Broadcaster ID
Reception Timeout
Insertion Timeout
Broadcaster ID Mode Off, Auto, Default Only, Source Only
Default Servicename
Broadcaster ID Source No, Input, Default
Broadcaster ID
Generic ANC
Generic ANC Off, On
Extraction
Max ANC Bit Rate 100 to 2000 kbps
Field 1
VBI Line 9 - VBI Line Off, Closed Caption
22
VBI Line 6 - VBI Line
Off, VITC, WSS, WSS-AFD, Teletext System B
23
EN/LZT 790 0023/1 R16A
Description
Specify what code is passed to the output when reserved
AFD codes are received at the input.
Pass Through: Passes code through unchanged.
Code as 0000: Changes code to 0000.
The source for Closed Captions data encoded as part of
the Video Stream. Only applicable when frame rate is
29.97 Hz.
Controls what mode the Time code (TC) is working in,
either Off, external source or internally generated. Also
sets what happens on loss of external source (zero or
freewheel).
Controls the external source of Time Code. Auto will select
the first source present in order of the drop down list.
Only in 525 line operation controls if Time Code takes
account of drop frames or not. Auto configures to external
source, or to ON for internal source.
Timeout in seconds for reception of Source ID from input
(RP207).
Timeout in seconds for insertion of default source ID.
Gives what to insert as a broadcaster ID.
The default service name to be used.
Indicates if the Broadcaster ID is derived from the input,
the default or is invalid.
The Broadcaster ID that is currently being inserted into the
output stream.
Controls whether Generic ANC is extracted from the SDI
stream or not as per SMPTE 2038-2008.
The maximum data rate of the Generic ANC data output.
Specifies the content in the respective VBI lines. Set to Off
if the line in the incoming video does not carry any
information, Closed Caption for closed caption information.
Visible for 480i (525-line) input streams.
Specifies the content in the respective VBI lines. Set to Off
if the line in the incoming video does not carry any
information, VITC for Time Code, WSS for Wide Screen
Signaling, WSS-AFD for Active Format Detection and
Teletext System B for Teletext. Visible for 576i (625-line)
input streams.
Web GUI Control
5-101