Ericsson AVP 1000 Reference Manual page 398

Glossary
ALC
AMOL I and II
ARP
ASI
ASIC
Async
ATM
ATSC
AVP
B3ZS
Backward
Compatibility
BAT
baud rate
BER
A-2
Automatic Loudness Control: ALC is an audio processing mode for
measuring and modifying audio amplitude with the aim of changing
the perceived loudness level. It uses a measurement based upon
the new standards for measuring audio loudness defined in ITU-R
BS.1770-2, this standard forms the measurement basis of the
guidelines in EBU R128 and ATSC/A85.
Automatic Measure of Line-ups I and II: Used by automated
equipment to measure programme-viewing ratings.
Address Resolution Protocol. A protocol used to "resolve" IP
addresses into underlying Ethernet MAC addresses.
Asynchronous Serial Interface.
Application-Specific Integrated Circuit: A customized chip designed
to perform a specific function.
Asynchronous.
Asynchronous Transfer Mode: A connection orientated, cell based,
data transport technology designed for Broadband ISDN (B-ISDN).
It provides a circuit-switched bandwidth-on-demand carrier system,
with the flexibility of packet switching. It offers low end-to-end delays
and (negotiable on call set up) Quality of Service guarantees.
Asynchronous refers to the sporadic nature of the data being
transmitted. Cells are transmitted only when data is to be sent,
therefore the time interval between cells varies according to the
availability of data.
Advanced Television Standards Committee: An organization
founded in 1983 to research and develop a digital TV standard for
the U.S.A. In late 1996, the FCC adopted the ATSC standard, the
digital counterpart of the NTSC standard.
Advanced Video Processor.
Bipolar with Three Zero Substitution: A method of eliminating long
zero strings in a transmission. It is used to ensure a sufficient
number of transitions to maintain system synchronization when the
user data stream contains an insufficient number of 1s to do so.
B3ZS is the North American equivalent of the European HDB3.
Refers to hardware or software that is compatible with earlier
versions.
Bouquet Association Table: Part of the service information data. The
BAT provides information about bouquets. It gives the name of the
bouquet and a list of associated services.
The rate of transfer of digital data when the data comprises
information symbols that may consist of a number of possible states.
Equivalent to bit rate when the symbols only have two states (1 and
0). Measured in Baud.
Bit Error Ratio: A measure of transmission quality. The rate at which
errors occur in the transmission of data bits over a link. It is
generally shown as a negative exponent, (e.g., 10
10,000,000 bits are in error).
-7
means that 1 in
EN/LZT 790 0023/1 R16A