Ericsson AVP 1000 Reference Manual page 297

Parameter Values
Au Information Cont Off, AU Info
Advanced
Lip Sync Offset -500 to 500 ms
Gain -6 to 6dB
Language
Language (Left)
Language (Right)
User Language 1
User Language 2
MPEG Version MPEG1, MPEG2
Copyright Off, On
Original Off, On
De-emphasis Off, 50/15us, CCITT J.17
Table 5.101 Dolby Digital Parameters
Parameter Values
Bit Rate 56, 64, 80, 96, 112, 128, 160, 192, 224, 256,
320, 384, 448, 512, 576, 640
1/0 (Left – input), 1/0 (Right – input), 1/0 (L+R)/2,
Coding Mode
2/0, 3/2L (5.1 Surround)
Metadata Controls Off, On
Coding Mode
Embedded/Decoded Auto, Serial Port (Program
Metadata source type
1 to 8)
Metadata override None, All, Compression Profile, Dialogue
type Normalization, Comp Profile and Dial Norm
Metadata Reversion Last Used, Preset
Mode
Metadata preset type 1 to 8
Embedded PCR On, Off
EN/LZT 790 0023/1 R16A
Description
Controls the insertion of private data in the adaptation unit
of the audio access units (AU). AU Info is defined in ETSI
TR 101 154. Only AU_PTS is present for audio
Configures a delay to the audio to improve A/V
synchronization.
Sets the gain in dB for the audio stream.
The language of the stream when not in dual mono (1+1)
mode.
The language of the left channel when in dual mono (1+1)
mode.
The language of the right channel when in dual mono
(1+1) mode.
A custom three-character language code when User
Language 1 is set in any of the language fields.
A custom three-character language code when User
Language 2 is set in any of the language fields.
Configures if MPEG-1 or MPEG-2 to be ignaled.
Indicates if the material is copyright protected.
Indicates if source is the original or a copy
To meet the MPEG-1 Layer 2 encoding algorithm
specification the audio must not have pre-emphasis
applied. If the input signal does have pre-emphasis
applied, a de-emphasis filter must be applied prior to
encoding.
Description
Bit Rate of the audio stream. The available options depend
on the selected coding mode.
Specifies what channel configuration to use for encoding.
Override default coding mode with coding mode indicated
in decoder program configuration or live metadata (if
present).
Selects where live metadata comes from.
Defines which metadata parameters to override.
Determines which metadata is used upon loss of live
metadata.
Defines which metadata preset to use if Preset is selected
for Metadata Reversion Mode.
Controls whether PCR is to be embedded in the audio
PES.
Web GUI Control
5-121