Ericsson AVP 1000 Reference Manual page 299

Table 5.103 HE-AAC Parameters
Parameter Values
Bit Rate 16, 24, 32, 48, 56, 64, 80, 96, 112, 128, 160,
192, 224, 256
Coding Mode 2/0, 3/2L (5.1 Surround)
Embedded PCR On, Off
Au Information Cont Off, AU Info
Encapsulation MPEG2 ADTS, MPEG4 LATM/LOAS
TNS (Temporal Noise Off, On
Shaping)
SBR Signalling Explicit, Implicit
Advanced
Lip Sync Offset -500 to 500 ms
Gain -6 to 6dB
Language
User Language 1
User Language 2
Table 5.104 Pass-thru Parameters
Parameter Values
Embedded PCR On, Off
Au Information Cont Off, AU Info
Advanced
Lip Sync Offset -500 to 500 ms
Gain -6 to 6dB
Language
User Language 1
User Language 2
EN/LZT 790 0023/1 R16A
Description
Bit Rate of the audio stream. The available options depend
on the selected coding mode.
Specifies what channel configuration to use for encoding.
Controls whether PCR is to be embedded in the audio
PES.
Controls the insertion of private data in the adaptation unit
of the audio access units (AU). AU Info is defined in ETSI
TR 101 154. Only AU_PTS is present for audio
Specifies the encapsulation used for transmitting AAC
content. It can be either MPEG-2 Audio Data Transport
Stream or MPEG-4 Low Overhead Audio Stream based on
MPEG-4 Low Overhead Audio Transport Multiplex.
Turns noise shaping on or off.
Specifies how Spectral Band Replication is signaled.
Configures a delay to the audio to improve A/V
synchronization.
Sets the gain in dB for the audio stream.
The language of the stream.
A custom three-character language code when User
Language 1 is set in the Language field.
A custom three-character language code when User
Language 2 is set in the Language field.
Description
Controls whether PCR is to be embedded in the audio
PES.
Controls the insertion of private data in the adaptation unit
of the audio access units (AU). AU Info is defined in ETSI
TR 101 154. Only AU_PTS is present for audio.
Configures a delay to the audio to improve A/V
synchronization.
Sets the gain in dB for the audio stream.
The language of the stream.
A custom three-character language code when User
Language 1 is set the Language field.
A custom three-character language code when User
Language 2 is set in the Language field.
Web GUI Control
5-123