Ericsson AVP 1000 Reference Manual page 3

Preliminary Pages
Contents
Chapter 1: Introduction
This chapter identifies the equipment versions covered by this manual, describes
the purpose of the equipment in a typical system and lists the available options.
Chapter 2: Installing the Equipment
This chapter provides product specific installation information including rack
mounting, ventilation and pin-out details of the external connectors.
Chapter 3: Getting Started
This chapter provides a guide to powering up the unit, setting up the IP address and
using the unit.
Chapter 4: Front Panel Control
This chapter describes the front panel display menus and options and details any
operating procedures.
Chapter 5: Web GUI Control
This chapter describes the configuration of the unit using the Web Graphical User
Interface.
Chapter 6: Advanced Video Processing & Networking
This chapter describes the principles and techniques used in the design of the
equipment to aid in understanding its operation and function.
Chapter 7: Options, Licensing and Upgrades
This chapter provides details of option cards that may be fitted to this equipment.
Chapter 8: Preventive Maintenance and Fault-finding
This chapter details routine maintenance tasks, servicing advice and information
regarding warranty and maintenance. It also lists error and error messages that may
occur and recommends the action to be taken.
Annex A: Glossary
Annex B: Technical Specification
Annex C: Audio Coding Standards
Annex D: Differences for Contribution Encoder and Voyager II
Annex E: Alarms List
Annex F: Logo Creator
EN/LZT 790 0023/1 R16A
iii