Ericsson AVP 1000 Reference Manual page 228

Web GUI Control
Parameter Values
Proprietary Descriptor Off, On
Insertion
Aspect Ratio (AR) Signaling
Video Index Off, On (Default), On (User)
Video Index Field 1 10 to 22
Video Index Field 2 10 to 22
SMPTE 2016 Off, On
AFD Sustain Indefinitely, Default after Timeout, Off after
Timeout
AFD Sustain Timeout 0 to 5,10, 20, 50, 100, 120
AFD Action on
Pass Through, Code as 0000
Reserved Codes
Closed Captions
Closed Captions Off, VBI lines, SMPTE334
Source
Timecode
Off, External, Zero on Loss, External, Freewheel
TC Mode
on Loss, Internal
Auto, ANC VITC1, ANC VITC2, ANC LTC, VBI
TC External Source
VITC
TC Dropframes Off, On, Auto
Broadcaster ID
Reception Timeout
Insertion Timeout
Broadcaster ID Mode Off, Auto, Default Only, Source Only
5-52
Description
Controls if the Legacy Proprietary Descriptor is inserted
into the PMT. Available only if VBI Descriptor Mode is set
to User.
Controls the extraction of Video Index (and thus whether
Video Index can be used as source of AR info).
Default: The default lines will be set to decode Video Index
(11/324 in 25Hz, 14/277 in 29.97 Hz)
User: The User defines the lines used to decode Video
Index.
Specifies which line contains the video index in field 1.
Specifies which line contains the video index in field 2.
Controls whether SMPTE 2016 data can be used as a
source for AR info.
Control what AFD code goes out when AFD is lost at input.
Indefinitely: Maintains previously received AFD code
indefinitely.
Default after Timeout: Maintains previously received AFD
code for period specified in Sustain Timeout, then drop to
default, i.e. code 1000.
Off after Timeout: Maintains previously received AFD code
for period specified in Sustain Timeout, then switch AFD
off.
Control how long previous AFD code is maintained. Zero
means drop to default immediately on loss.
Specify what code is passed to the output when reserved
AFD codes are received at the input.
Pass Through: Passes code through unchanged.
Code as 0000: Changes code to 0000.
The source for Closed Captions data encoded as part of
the Video Stream. Only applicable when frame rate is
29.97 Hz.
Controls what mode the Time code (TC) is working in,
either Off, external source or internally generated. Also
sets what happens on loss of external source (zero or
freewheel).
Controls the external source of Time Code. Auto will select
the first source present in order of the drop down list.
Only in 525 line operation controls if Time Code takes
account of drop frames or not. Auto configures to external
source, or to ON for internal source.
Timeout in seconds for reception of Source ID from input
(RP207).
Timeout in seconds for insertion of default source ID.
Gives what to insert as a broadcaster ID.
EN/LZT 790 0023/1 R16A