Ericsson AVP 1000 Reference Manual page 134

Front Panel Control
Destination UDP Port
Source IP Address
Source UDP Port
Vlan ID Tag
Time To Live
Type Of Service
ASI Output <n> (Slot <m>)
Add New Transport Stream
Add Existing Transport Stream
Transport Stream ID: <id>
Service List
Add Service
Service <name>
Component List
Add Component
<Component name> on pid <pid>
Service Provider
Service Name
Service ID
Service Type
4-18
Elementary Stream
PID
Bit Rate Weighting
The destination UDP port to use in the IP packet header of the IP
packets that carry the Transport Stream
The source IP address to use in the IP packet header of the IP
packets that carry the Transport Stream
The source UDP port to use in the IP packet header of the IP
packets that carry the Transport Stream
TTL value for inclusion in the IP header
ToS value for inclusion in the IP header
Selects ASI Output <n> on the ASI option card in slot <m>. If the
ASI output is mirrored, then there is only 1 output per card.
Adds a new Transport Stream to the output. Displayed only if no
Transport Stream is defined for the ASI output.
Creates a copy of an existing Transport Stream at the current
output. Displayed only if no Transport Stream is defined for the ASI
output.
Selects the Transport Stream with id <id> to modify its parameters.
The list of services in the current Transport Stream.
Adds a service to the current Transport Stream.
Selects the service with <name> already added to the current
Transport Stream.
Lists the components in the current service.
Adds a new component to the current service.
Selects the component with <component name> and <pid> already
added to the current service.
The elementary stream associated with the component produced by
one of the VCM modules in the unit.
The Packet Identifier that identifies the TS packets carrying the
current component.
Fixed, Minimum, 2-20. The weighting associated to the current
component. A component with Fixed weighting does not respond to
changes in the Transport Stream Bit Rate. If Minimum is set for a
component, it will always use the minimum Bit Rate defined for the
video profile it is encoded with. A value 2-20 determines how much
a component is changed when the Transport Stream Bit Rate is
changed relative to other components with Bit Rate weighting other
than Minimum.
The name of the service provider as appears in the NIT.
The name of the service as appears in the NIT.
The unique identifier of the current service within the current
Transport Stream.
Digital TV, Digital Radio, Teletext, Mosaic, Data Broadcast.
EN/LZT 790 0023/1 R16A