Ericsson AVP 1000 Reference Manual page 247

Parameter Values
Video Bit Rate The valid bit rate range depends on the selected
video profile.
Compatibility
Buffer Mode
Ultra low delay
Delay
Video Output
The following parameters are available on the Output tab of the Properties widget
on the Service Configuration page when a video component is selected in the
Outputs widget. The same parameters can be accessed through the
Advanced/CE-a/Video/Video 1/Video/Main Video/Stream Output menu on the
front panel.
Table 5.38 Video Output Parameters
Parameter Values
Embedded PCR Off, On, On (Picture Header)
Copyright Off, On
Original Off, On
PES Packet Per GOP, Picture
AU Information Ctrl RAI, RAI and AU Info, RAI, AU Info and TC
AR Signaling Output
Off, AFD Only, AFD and Bar Data
Control
TC Output Location Off, SEIMsg
Video Component
The following parameters are available on the Component tab of the Properties
widget on the Service Configuration page when a video component is selected in
the Outputs widget. The same parameters can be accessed through the
Output/<output name>/Transport Stream ID: <n>/Service List/<service
name>/Component List/Slot <x> Video Stream on PID <y> menu on the front
panel.
EN/LZT 790 0023/1 R16A
Description
Defines the Transport Stream bit rate to be used by the
compressed video component. If Bit Rate Tracking Mode
is set to Maximize Video for the Transport Stream that
contains the video component and the Bit Rate Weighting
of the component is set to other than Fixed or Minimal, this
field is read only.
Compatibility with the JPEG 2000 standard, usually means
a delay no more than 160 ms.
Very low delay brought by the JPEG 2000 encoding.
Displays the actual video encoding delay. Read only
parameter.
Description
Sets if the PCR is embedded within the video. If it is set to
other than Off, the PCR PID field of a service will become
read only and will contain the PID of the current component.
Sets the copyright flag in the elementary stream header.
Sets the original flag in the elementary stream header.
Determines how PES packets shall be generated. The
Picture option is only available if MPEG 2 encoding is used.
Controls insertion of Private Data in the TS Adaptation
Field for video Access Units (AU) with the following values:
Random Access Indicator (RAI), ETSI 101 154 (AU info),
and Time Code (TC).
Controls what Aspect Ratio signaling will get embedded in
the video as user data. AFD sources are: SMPTE 2016,
Video Index, WSS-AFD/WSS, user set Aspect Ratio. Bar
Data is only SMPTE 2016.
Defines how timecode is put into the output video stream.
Web GUI Control
5-71