Ericsson AVP 1000 Reference Manual page 253

Parameter Values
Action on AFD lost Convert as anamorphic and put AFD code 1000
out, Convert as specified in Default and put AFD
code out
Action on AFD code Convert as anamorphic and put AFD code 1000
0000 out, Convert as specified in Default and put AFD
code out
Video Encoding
The following parameters are available on the Encode tab of the Properties widget on the
Service Configuration page when a video component is selected in the Outputs widget.
The same parameters can be accessed through the Advanced/CE-x/Video/Video
1/Video/Main Video/Video Encoder menu on the front panel.
Table 5.49 Video Encoding Parameters
Parameter Values
Video Profile Profile Off,
SD MPEG2 Main Profile Main Level 4:2:0 8 bit,
SD MPEG2 422 Profile Main Level 4:2:2 8 bit,
SD H.264 Main Profile Level 3.0 4:2:0 8 bit,
SD H.264 High Profile Level 3.0 4:2:0 8 bit,
SD H.264 High Profile Level 3.1 4:2:0 8 bit,
SD H.264 Hi422 Profile Level 3.1 4:2:2 8 bit,
SD H.264 High Profile Level 3.1 4:2:2 10 bit,
HD MPEG2 Main Profile High Level 4:2:0 8 bit,
HD MPEG2 4:2:2 Profile High Level 4:2:2 8 bit,
HD H.264 Main Profile Level 4.0 4:2:0 8 bit,
HD H.264 High Profile Level 4.0 4:2:0 8 bit,
HD H.264 High Profile Level 4.1 4:2:0 8 bit,
HD H.264 Hi422 Profile Level 4.1 4:2:2 8 bit,
HD H.264 Hi422 Profile Level 4.1 4:2:2 10 bit
HD p50/60 H.264 High Profile Level 4.2 4:2:0
8 bit
HD p50/60 H.264 High422 Profile Level 4.2 4:2:2
8 bit
HD p50/60 H.264 High422 Profile Level 4.2 4:2:2
10 bit
Profile for SD input Profile Off,
SD MPEG2 Main Profile Main Level 4:2:0 8 bit,
SD MPEG2 422 Profile Main Level 4:2:2 8 bit,
SD H.264 Main Profile Level 3.0 4:2:0 8 bit,
SD H.264 High Profile Level 3.0 4:2:0 8 bit,
SD H.264 High Profile Level 3.1 4:2:0 8 bit,
SD H.264 Hi422 Profile Level 3.1 4:2:2 8 bit,
SD H.264 High Profile Level 3.1 4:2:2 10 bit,
EN/LZT 790 0023/1 R16A
Description
Specifies what to do if AFD is lost.
Specifies what to do if AFD code 0000 is received.
Description
Sets the encoder profile. The profile will also affect the
allowed bit rate range.
The profile to set when an SD input is detected on the SDI
input. Visible only if Input Detection is set to Auto Detect
and Configure. If this option is visible, the Video Profile
cannot be set manually.
Web GUI Control
5-77