Ericsson AVP 1000 Reference Manual page 242

Web GUI Control
Parameter Values
Teletext Page Number
Teletext Page
List of languages
Language
Teletext Component
This section describes the parameters associated with the component carrying
Teletext data.
The following parameters are available on the Component tab of the Properties
widget on the Service Configuration page when a Teletext stream is selected in
the Outputs widget. The same parameters can be accessed through the
Output/<output name>/Transport Stream ID: <n>/Service List/<service
name>/Component List/<component name> menu on the front panel.
Table 5.32 Teletext Component Parameters
Parameter Values
PID 32 to 8190
Bit Rate Weighting Fixed
5.5.3.1.5 VBI and ANC Stream Configuration
This section describes the parameters available for setting up VBI and ANC
streams.
VBI and Ancillary Data
This section gives the parameters that have an effect on what ancillary data is
extracted and how the data is transmitted.
The following parameters are available on the VBI tab of the Properties widget on
the Service Configuration page when an ANC stream is selected in the Outputs
widget. The same parameters can be accessed through the Advanced/CE-
a/Video/Video 1/Input/VBI Extraction menu on the front panel.
Table 5.33 VBI and Ancillary Data Parameters
Parameter
Description Control
VBI Descriptor Mode
VBI Data Descriptor
Insertion
VBI Teletext Descriptor
Insertion
5-66
Values
Standard, Legacy, Philips, User
Off, On
Off, On
Description
The page number for the page to be set.
The language set for the Teletext descriptor.
Description
Sets the packet identifier associated with the component.
Specifies the weight associated to the component in the
Bit Rate Tracking algorithm. For audio stream, this is Fixed
and read only.
Description
The source for Closed Captions data encoded as part of
the Video Stream (only applicable when Video Frame Rate
is 29.97 Hz)
Controls if the VBI Data Descriptor is inserted into the
PMT. Available only if VBI Descriptor Mode is set to User.
Controls if the VBI Teletext Descriptor is inserted into the
PMT. Available only if VBI Descriptor Mode is set to User.
EN/LZT 790 0023/1 R16A