Ericsson AVP 1000 Reference Manual page 136

Front Panel Control
Transport Stream ID <id>
Service List
Add Service
Service <name>
Component List
y Add Component
<Component name> on <pid>
Service Provider
Service Name
Service ID
Service Type
PMT Pid
Logical Channel
PCR PID
Scrambling
BISS SW
BISS ESW
Current State
Change State
4-20
Elementary Stream
PID
Bit Rate Weighting
Selects the Transport Stream with ID <id> to modify its parameters.
The list of services in the current Transport Stream.
Adds a new service to the current Transport Stream.
Selects the service with <name> already added to the current
Transport Stream.
List of components in the current service.
Adds a new component to the current service.
Selects the component with <component name> and <pid> already
added to the current service.
The elementary stream associated with the component produced by
one of the VCM modules in the unit.
The Packet Identifier that identifies the TS packets carrying the
current component.
Fixed, Minimum, 2-20. The weighting associated to the current
component. A component with Fixed weighting does not respond to
changes in the Transport Stream Bit Rate. If Minimum is set for a
component, it will always use the minimum Bit Rate defined for the
video profile it is encoded with. A value 2-20 determines how much
a component is changed when the Transport Stream Bit Rate is
changed relative to other components with Bit Rate weighting other
than Minimum.
The name of the service provider as appears in the NIT.
The name of the service as appears in the NIT.
The unique identifier of the current service within the current
Transport Stream.
Digital TV, Digital Radio, Teletext, Mosaic, Data Broadcast.
PID assigned to the PMT that describes the current service.
Appears in the NIT and provides a default channel number label for
the current service.
The PID of the TS packets that carry the clock reference for the
current service. If the service has a component with the Embedded
PCR parameter set to On, this field contains the PID of that
particular video stream and it is read only.
Off, BISS-1, BISS-E. Disables or enables the scrambling of the
current service by the Basic Interoperable Scrambling System with
or without encrypted keys.
The 12 hexadecimal digit clear session word used for scrambling
the current service. Visible only if BISS-1 is selected for Scrambling.
The 16 hexadecimal digit encrypted session word used for
scrambling the current service. Visible only if BISS-E is selected for
Scrambling. The key entered here is encrypted by the BISS Injected
ID found under Advanced/System/Base Unit.
The Setmode state of the Transport Stream. Read only parameter.
Sets the Setmode state of the Transport Stream. The options
available depends on the value set for MGP Mode under
Advanced/System/MGP Support
EN/LZT 790 0023/1 R16A