Ericsson AVP 1000 Reference Manual page 359

If the appropriate licenses are available, up to 8 channel pairs of audio can be
encoded using the MPEG-1 Layer II algorithm, 3 audio channel pairs can be
encoded in Dolby Digital or 6 channel pairs in AAC LC or HE-AAC. There is also an
option to configure the unit to pass-thru pre-encoded Dolby Digital, Dolby-E or
Linear PCM audio.
The VCM is also capable of processing VBI from the analogue input and ANC and
VBI from the SDI input.
7.4.4.2 Inputs
This module provides the following inputs:
•
•
•
•
•
Table 7.6
Standard
NTSC - M (without pedestal)
NTSC - M (with pedestal)
PAL - B
PAL - G
PAL - H
PAL - I
PAL - D
Note: Reduced horizontal resolutions are configurable on the VCM but are not
7.4.4.3 Input Detection
When encoding analogue video source, the unit is not able to automatically detect
the input video format. Instead, the user must set the correct format through the user
interface and the unit will update the locked state accordingly.
Input auto detection works for digital video input through the SDI/HD-SDI connector.
7.4.4.4 Ancillary Data
The following ancillary data is supported only when the unit is fed by a digital video
EN/LZT 790 0023/1 R16A
HD/SD SDI Input via a 75 Ω BNC female connector.
Analogue video input via a 75 Ω BNC female connector.
Digital audio input via a 15-way D-Type male connector (see Chapter 2 Installing
the Equipment)
Analogue audio input via a 15-way D-Type male connector (see Chapter 2
Installing the Equipment).
Video.
Analogue Video Standard Parameters
recommended for contribution feeds. If selected, the reduced resolution
must also be supported by the decoder.
Number of Lines
525
525
625
625
625
625
625
Options, Licensing and Upgrades
Frame Rate Video Bandwidth
29.97 frames/s 4.2 MHz
29.97 frames/s 4.2 MHz
25 frames/s 5.0 MHz
25 frames/s 5.0 MHz
25 frames/s 5.0 MHz
25 frames/s 5.0 MHz
25 frames/s 5.0 MHz
7-13