Ericsson AVP 1000 Reference Manual page 308

Web GUI Control
5.5.4.1.2 Additional Settings for IP Output Transport Streams
The IP related Transport Stream parameters are available in the Properties widget
on the Service Configuration page if an IP output Transport Stream is selected in
the Outputs widget.
Table 5.116 Additional Settings for IP Output Transport Streams
Parameter Values
IP Bit Rate
TS Packets per IP 1 to 7
Packet
UDP, RTP, RTP FEC Column, RTP FEC
IP Encapsulation
Column and Row
Number of Rows
Number of Columns
Alignment Block Aligned, Non Block Aligned
IP Configuration/Destination 1
Destination IP aaa.bbb.ccc.ddd
Address
Destination UDP Port 0 to 65535
Source IP Address aaa.bbb.ccc.ddd
Source MAC Address
Source UDP Port 0 to 65535
Vlan Header Disabled, Enabled.
Vlan ID Tag
Vlan Tag
Vlan Priority 0 to 7
Time To Live 0 to 240
Type Of Service 0 to 255
Actual source IP aaa.bbb.ccc.ddd
address, calculated by
a rule
Actual source MAC
address, calculated by
a rule
5-132
Description
Specifies the bit rate of the IP output and includes the
overhead added by IP encapsulation. Read only parameter.
Specifies how many Transport Stream packets to encapsulate
in one IP packet.
Specifies what higher layer to encapsulate in IP packets. UDP
and RTP is self explanatory and means that the Transport
Stream is first encapsulated in UDP or RTP packets, then an
IP header is added. If RTP FEC column or RTP FEC Columns
and Row is selected one (Column) or two (Column and Row)
RTP streams are output in addition to the RTP streams that
carry the Transport Stream.
The number of rows used in FEC encoding.
The number of columns used in FEC encoding.
The aligned method used for ProMPEG FEC (SMPTE
2022-1, 2)
The destination IP address to use in the IP packet header of
the IP packets that carry the Transport Stream
The destination UDP port to use in the IP packet header of the
IP packets that carry the Transport Stream
The source IP address to use in the IP packet header of the IP
packets that carry the Transport Stream
Read only parameter, not yet supported.
The source UDP port to use in the IP packet header of the IP
packets that carry the Transport Stream
The VLAN tag to use for the current IP stream.
The priority to be used by the switches to prioritize different
services.
TTL value for inclusion in the IP header
ToS value for inclusion in the IP header
The source IP address. Read only parameter
The source MAC address. Read only parameter.
EN/LZT 790 0023/1 R16A