Ericsson AVP 1000 Reference Manual page 300

Web GUI Control
Table 5.105 Audio Description Service Parameters
Parameter Values
Bit Rate 64
Coding Mode 1/0 (Left – input)
Embedded PCR On, Off
Au Information Cont Off, AU Info
Advanced
Lip Sync Offset -500 to 500 ms
Gain -6 to 6dB
Language
User Language 1
User Language 2
Audio Component
The parameters listed in the table below are available on the Component tab of the
Properties widget on the Service Configuration page when an audio component is
selected in the Outputs widget. The same parameters can be accessed through the
Output/<output name>/Transport Stream ID: <n>/Service List/<service
name>/Component List/<component name> menu on the front panel.
Table 5.106 Audio Component Parameters
Parameter Values
PID 32 to 8190
Bit Rate Weighting Fixed
Dolby Metadata Presets
Four custom Dolby Metadata Presets can be configured in the Advanced Setup tab of the
Device Configuration page. To set the preset options, in the Advanced Video Processor
Settings drill down to Encoder > Slots > Slot <n> - CE-HEVC >CE-HEVC > Audio Module
> Dolby Metadata Presets, and select the preset you want to modify. Alternatively, the
settings can be reached through the front panel under Advanced/CE-x/Audio
Module/Dolby Metadata Presets. Any of these presets can then be applied to any audio
channel encoding audio in the Dolby Digital format. The table lists the parameters for each
preset.
5-124
Description
Bit Rate of the audio stream.
Specifies what channel configuration to use for encoding.
Controls whether PCR is to be embedded in the audio
PES.
Controls the insertion of private data in the adaptation unit
of the audio access units (AU). AU Info is defined in ETSI
TR 101 154. Only AU_PTS is present for audio
Configures a delay to the audio to improve A/V
synchronization.
Sets the gain in dB for the audio stream.
The language of the stream.
A custom three-character language code when User
Language 1 is set in the Language field.
A custom three-character language code when User
Language 2 is set in the Language field.
Description
Sets the packet identifier associated with the component.
Specifies the weight associated to the component in the
Bit Rate Tracking algorithm. For audio stream, this is Fixed
and read only.
EN/LZT 790 0023/1 R16A