Table of Contents
Advertisement
10
IC200ALG240
Analog Input Module, 16 Bit Voltage/Current, 1500VAC Isolation, 8 Channels
Module Specifications
Module Characteristics
Channels
Module ID
Isolation:
User input to logic (optical) and to frame
ground,
Group to Group
Channel to channel
LED indicators
Backplane current consumption
External power supply:
Range
Current consumption
Thermal derating
Diagnostics
Input Characteristics
Input operating range
Accuracy at 25 degrees C
Temperature coefficient
Analog Resolution (1 LSB)
Channel data Update rate per module
Channel-to-channel crosstalk rejection
Input default
Field input DC resistance
Field input filter
Normal mode (power line frequency) rejection
Field Input Ranges
Maximum field input (without damage)
10-10
VersaMax® Modules, Power Supplies, and Carriers User's Manual – March 2003
8 inputs
FFFF9802
250VAC continuous; 1500VAC for 1 minute
Not applicable
250VAC continuous; 1500VAC for 1 minute
FLD PWR LED indicates the presence of both logic
power and user power. OK LED indicates module status.
5V output: 15mA maximum.
3.3V output: 120mA maximum
+19.5 to +30VDC including ripple
100mA maximum plus load currents
None
High/Low Limit, Over/Underrange, Open Wire, Loss of
Field Power Supply, Non-volatile memory fault
Current mode: +1 to 20mA
Voltage mode: +/-10VDC
+/- 0.1% maximum of full scale
Current mode: 45ppm/°C typical, 90 ppm/°C maximum
Voltage mode: 30ppm/°C typical, 60 ppm/°C maximum
Current mode: 381 nA nominal
Voltage mode: 381 µV nominal
Approximately
20 mS max. @ 50 Hz filter frequency
Approximately 16.7 mS max. @ 60 Hz filter frequency
70dB minimum
0 (default)
Hold Last State (configurable)
Current mode:150 Ohms
Voltage mode:760 KOhms
Type: Digital w/programmable notches at 50 or 60 Hz
3 dB Corner Frequency: 10Hz ± 25%
35 dB minimum
Current mode: Approximately 0 mA to +25 mA
Voltage mode: Approximately –12.5 V to +12.5 V
Current mode: ± 35 mA continuous
Voltage mode: ± 17.5 V continuous
GFK-1504K
Hide quick links:
Advertisement
Table of Contents
