Warnings, Cautions, And Notes - GE VersaMax Manual

Warnings, Cautions, and Notes

as Used in this Publication
Warning notices are used in this publication to emphasize that hazardous
voltages, currents, temperatures, or other conditions that could cause
personal injury exist in this equipment or may be associated with its use.
In situations where inattention could cause either personal injury or
damage to equipment, a Warning notice is used.
Caution notices are used where equipment might be damaged if care is not
taken.
Notes merely call attention to information that is especially significant to
understanding and operating the equipment.
This document is based on information available at the time of its publication. While efforts have
been made to be accurate, the information contained herein does not purport to cover all details or
variations in hardware or software, nor to provide for every possible contingency in connection
with installation, operation, or maintenance. Features may be described herein which are not
present in all hardware and software systems. GE Fanuc Automation assumes no obligation of
notice to holders of this document with respect to changes subsequently made.
GE Fanuc Automation makes no representation or warranty, expressed, implied, or statutory with
respect to, and assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of
the information contained herein. No warranties of merchantability or fitness for purpose shall apply.
The following are trademarks of GE Fanuc Automation North America, Inc.
Alarm Master
CIMPLICITY
CIMPLICITY 90–ADS
CIMSTAR
Field Control
GEnet
©Copyright 2001-2003 GE Fanuc Automation North America, Inc.
Warning
Caution
Note
Genius PowerTRAC
Helpmate ProLoop
Logicmaster PROMACRO
Modelmaster Series Five
Motion Mate Series 90
PowerMotion Series One
All Rights Reserved
GFL-002
Series Six
Series Three
VersaMax
VersaPoint
VersaPro
VuMaster
Workmaster