GE VersaMax Manual page 300

Module Specifications
Module Characteristics
Channels
Module ID
Isolation:
User input to logic (optical) and to
frame ground
Group to group
Channel to channel
LED indicators
Backplane current consumption
External power supply
Thermal derating
Configuration parameters
Diagnostics
Input Characteristics: Voltage Mode (default)
Input voltage:
Input Impedance
Accuracy at:
Resolution:
Filter response
Update rate per module
Common mode voltage
Channel-to-channel crosstalk rejection 30dB minimum
Input Characteristics: Current Mode
Input current
Input Impedance
Accuracy at:
Resolution
Filter response
Update rate per module
Channel-to-channel crosstalk rejection 30dB minimum
*
In the presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy may be degraded to +/-3%.
GFK-1504K Chapter 10 Analog Input Modules
Analog Input Module, 12 Bit Voltage/Current 4 Channels
Bipolar
Unipolar
25 degrees C*
0 to 60 degrees C
Bipolar mode:
Unipolar mode:
25 degrees C*
0 to 60 degrees C
4 single ended, one group
FFFF9004
250VAC continuous; 1500VAC for 1 minute
Not applicable
None
INT PWR LED indicates internally-generated field power is
present
OK LED indicates backplane power is present
5V output: 125mA maximum
None
None
Range select, Mode select (jumpers on carrier)
Loss of Internal Power
+/-10VDC (default)
0 to 10V (configurable)
126kOhms maximum
+/-0.3% typical of full scale, +/-0.5% maximum of full scale
+/-1% maximum of full scale
2.5mV = 8 counts
2.5mV = 8 counts
5.0ms
0.4ms
0 V
4 to 20mA
200 Ohms maximum
+/-0.3% typical of full scale, +/-0.5% maximum of full scale
+/-1% maximum of full scale
4µA = 8 counts
5ms
0.4ms
10
IC200ALG230
10-3