GE VersaMax Manual page 292

Module Specifications
Module Characteristics
Points
Module ID
Isolation:
User input/output to logic
(optical) and to frame ground
Group to group
Point to point
LED indicators
Backplane current consumption
External power supply
Thermal derating
Configuration parameters
Input Characteristics
Input voltage
User input current
Input impedance
On state voltage
Off state voltage
On state current
Off state current
On response time
Off response time
Configurable filter time
Output Characteristics
Output voltage
Output voltage drop
Load current
Output leakage current
On response time
Off response time
Protection
GFK-1504K Chapter 9 Discrete Mixed Modules
Mixed Module, Output 12/24VDC Positive Logic Grouped
16 Points / Input 5/12VDC Pos/Neg Logic Grouped 16 Points
One group of 16 Outputs
Two groups of 8 Inputs
80088080
250VAC continuous; 1500VAC for 1 minute
250VAC continuous; 1500VAC for 1 minute
None
One LED per point shows individual point on/off state
FLD PWR LED indicates field power is present
OK LED indicates backplane power is present
5V output: 115mA maximum
+10.2 to +30VDC, +12/24VDC nominal
See diagram
Input response time
0 to +15VDC, +5/12VDC nominal
1.8mA typ. @ 5VDC, 4.9mA typ. @ 12VDC
2.4kOhms typ. @12VDC
+4.2 to +15VDC
0 to +2.6VDC
1.45mA minimum
0 to 0.7mA maximum
0.25ms maximum
0ms, 1.0ms (default), or 7.0mS
+10.2 to +30VDC, +12/24VDC nominal
0.3VDC maximum
0.5 Amp at 30VDC maximum (resistive)
2.0 Amps maximum for 100ms inrush
0.5mA at 30VDC maximum
0.2ms maximum
1.0ms maximum
No internal fuses
9
IC200MDD851
9-49