GE VersaMax Manual page 250

Mixed Module, Output 24VDC Pos. Logic 0.5A Grouped w/ESCP 16 Points
Module Specifications
Module Characteristics
Points
Module ID
Isolation:
User input to logic (optical)
and to frame ground
Group to group
Point to point
LED indicators
Backplane current consumption
External power supply
Thermal derating
Configuration parameters
Input Characteristics
Input voltage
On state voltage
Off state voltage
On state current
Off state current
On response time
Off response time
Additional configurable filter time
Input impedance
Output Characteristics
Output voltage
Output voltage drop
Steady-state overcurrent trip point
Load current
Output leakage current
On response time
Off response time
Protection (each output)
GFK-1504K Chapter 9 Discrete Mixed Modules
/ Input 24VDC Pos/Neg Logic Grouped 16 Points
1 group of 16 outputs
2 groups of 8 inputs
80088080
250VAC continuous; 1500VAC for 1 minute
250VAC continuous; 1500VAC for 1 minute
None
One green LED per point shows individual point on/off state.
One amber LED per point shows individual point overloads for
outputs.
FLD PWR LED indicates field power is present
OK LED indicates backplane power is present
5V output: 100mA maximum
+18 to +30VDC, +24VDC nominal
See diagram
Input response time
0 to +30VDC, +24VDC nominal
+15 to +30VDC
0 to +5VDC
2.0 to 5.5mA
0 to 0.5mA
0.5ms maximum
0 ms, 1.0ms (default), or 7.0ms
10kOhms maximum
+18 to +30VDC, +24VDC nominal
0.5V maximum
1.6A typical, 0.7A to 2.5A maximum range
0.5 Amp at 30VDC maximum (resistive)
2.0 Amps maximum for 100ms inrush
0.5mA at 30VDC maximum
0.5ms maximum
0.5ms maximum
Short circuit protection, overcurrent protection, free-wheeling
diodes
9
IC200MDD842
9-7