5.21 Analog Input Module EP- 3164
Analog Input Module EP-3164
The EP-3164 analog input module can record up to 4 analog sensors with ±10 V, ±5 V, 0-10 V, 0-5 V,
2-10 V, 1-5 V, 0-20 mA or 4-20 mA. The resolution is 16 bit per channel. Sensors can be connected to
each connector in a 2-wire, 3-wire or 3-wire connection + FE. The measurement range is defined
using parameterization. A status LED is assigned to each channel. The module electronics supply the
connected sensors with power from the input current path (I
The inputs are protected against voltage surges and overcurrent. Voltages that exceed ±30 V may
cause the destruction of the module. As a protection against overcurrent, the module temporarily
switches to voltage mode.
GFK-2958E
Chapter 5 Detailed Descriptions of I/O Modules
Connection Diagram EP-3164
(left: 3/4-wire sensor with sensor wiring via electronics,
right: 2-wire sensor with sensor wiring via electronics)
).
IN
RSTi-EP User Manual
233