GE VersaMax Manual page 387

11
IC200ALG328
Analog Output Module, 13 Bit Current, 12 Channels
Module Specifications
Module Characteristics
Channels
Module ID
Isolation:
User input to logic and to
frame ground
Group to group
Channel to channel
LED indicators
Backplane current
consumption
External power supply:
Range
Current consumption
Thermal derating
Configuration parameter
Diagnostics
Output Characteristics
Output current
Load characteristics:
Resistive
Capacitive
Inductive
Accuracy:
+25 deg C**
0 to +60 degrees C
Resolution
Update rate per module
Channel-to-channel crosstalk
rejection
Output default
* R
L(MAX)
** In the presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy
may be degraded an additional +/-1%.
11-42 VersaMax® Modules, Power Supplies, and Carriers User's Manual – March 2003
12 single-ended, one group
FFFF94C0
250VAC continuous; 1500VAC for 1 minute
Not applicable
None
FLD PWR LED indicates field power is present
OK LED indicates backplane power is present
5V output: 50mA maximum
+18 to +30VDC (including ripple)
2A inrush maximum
100 mA maximum (no load)
270 mA maximum (all 12 outputs at full scale)
See diagram
Range, output default
Loss of User Side (Field) Power
4 to 20mA (default)
0 to 20mA (configured with jumper)
0 to 800 Ohms maximum*
0.1µF maximum
0.5H maximum
+/- 0.3% of full scale (typical), +/- 0.5% of full scale (max.)
+/-1% of full scale (max.)
4-20 mA: 5 counts = 2.5 uA (~12.7 bits)
0-20 mA: 4 counts = 2.5 uA (13 bits)
15 mSec maximum
70dB minimum
Hold Last State (default)
Low End of Range(configurable)
= (V – 4V) / 20.38mA
FIELD PS
GFK-1504K