Wiring For A Box-Style I/O Carrier Or Spring-Style I/O Carrier - GE VersaMax Manual

2

Wiring for a Box-Style I/O Carrier or Spring-Style I/O Carrier

(IC200CHS002, IC200CHS005)
Field Wiring
Terminals
Each terminal on a Box-Style or Spring-Style I/O Carrier accommodates one solid or
stranded AWG #14 (avg. 2.1mm
wire, or two wires up to AWG #18 (avg. 0.86mm
for 90 degrees C. When inserting two wires in the same position, the wires must be the
same size and type (solid or stranded).
The I/O carrier can accommodate current levels up to 2 Amps per point or 8 Amps per
each power and ground, and a voltage range of up to 264 VAC. Voltage transients up to
300 VAC will not damage the carrier.
For a Box-Style I/O Carrier, recommended terminal torque is .37 to .45 ft-lbs.
The label provided with the module can be folded and inserted in the module's transparent
door.
Terminal Numbering for a Box-Style or Spring-Style I/O Carrier
B1
2-18 VersaMax® Modules, Power Supplies, and Carriers User's Manual – March 2003
2
cross section) to AWG #22 (avg. 0.36mm
A1 A2 A3 A5 A6
A4
B2 B3 B5 B6 B7
B4
2
cross section). Use copper wire rated
A7 A8 A9 A12 A13
A10
A11
B8 B9 B12 B13
B10 B11
2
cross section)
A15 A16 A17 A18
A14
B14 B15 B16 B17 B18
GFK-1504K