Ic200Acc302 Input Simulator - GE VersaMax Manual

The VersaMax Input Simulator (IC200ACC302) has 16 switches that can be used to easily
turn on or off any input on a 24VDC VersaMax discrete input or mixed I/O module.
The module must be installed on an I/O Carrier with Box Style Terminals (IC200CHS002)
or on a Connector-Type I/O Carrier with Box-Type Interposing Terminals
(IC200CHS012) or Auxiliary Terminals (IC200TBM002). It can be installed in either the
A or B terminals of the carrier.
The Input Simulator can be installed in either the A or B terminals of the carrier,
depending on which module inputs should be controlled. After inserting the pins of the
Input Simulator, tighten down the screws on the carrier.
A separate external source of 24VDC power is required. The power supply specifications
must be appropriate for the I/O module being controlled. The power supply connection
terminals on the Input Simulator accommodate one solid or stranded AWG #14 (avg.
2
2.1mm cross section) to AWG #22 (avg. 0.36mm
AWG #18 (avg. 0.86mm
GFK-1504K Chapter 15 Accessories
ON ON ON ON ON ON ON ON ON
OFF OFF OFF OFF OFF OFF OFF OFF OFF
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 SW9
94mm (3.7in)
2
cross section).
ON ON ON ON ON
+24 0V
OFF OFF OFF OFF OFF OFF OFF
SW10 SW11 SW12 SW13 SW14 SW15 SW16
2
cross section) wire, or two wires up to
IC200ACC302
Input Simulator
9.5mm
(0.375in)
28.6mm
(1.125in)
Input Simulator Installed
on B Terminals
of CHS002
15-3
15