Analog Output Module, 12 Bit Voltage 0 To 10Vdc 4 Channels - GE VersaMax Manual

Analog output module IC200ALG321 provides four analog voltage outputs. The output
range is 0 to +10VDC
An external 24V power supply is required for the outputs.
Intelligent processing for this module is performed by the CPU or Network Interface Unit.
The module receives 4 words of analog output data.
LED Indicators
The green FLD PWR LED indicates the presence of user-side power for the analog field-
side circuits.
The green OK LED is on when backplane power is present to the module.
Diagnostics
The module reports a Loss of User Side Power fault for field-side circuits.
Configuration Parameters
The module is easily set up with a jumper for the outputs to either hold their last states or
default to 0V if backplane power or communications are interrupted or the PLC is stopped.
External user power must remain uninterrupted.
Outputs remain in their default or last state until the module receives different output data
from the backplane, or until field power is removed.
GFK-1504K Chapter 11 Analog Output Modules

Analog Output Module, 12 Bit Voltage 0 to 10VDC 4 Channels

IND CONT EQ FOR HAZ LOC
CLASS 1 DIV 2 GROUPS ABCD
Ambient 60C
CLASS I ZONE 2 GROUP IIC
Ex nA IIC 0C<To<60C
Ex nV II Demko No. 98Y.125014
IC200ALG321
FLD
PWR
IC200ALG321
ANALOG OUTPUT 12BIT
VOLTAGE 0-10V 4CH
1234567 814
OK
11
11-9