Connecting The Expansion Cable: Single-Ended - GE VersaMax Manual

2

Connecting the Expansion Cable: Single-ended

For a two-rack local system with one non-isolated expansion rack (IC200ERM002) and
NO Expansion Transmitter, connect the expansion cable from the serial port on the
VersaMax CPU or NIU to the Expansion Receiver as shown below. The maximum cable
length is one meter. Cables cannot be fabricated for this type of installation; cable
IC200CBL600 must be ordered separately.
1 M
No Terminator Plug is needed in a single-ended installation; however, it will not impede
system operation if installed.
Single-Ended Inter-Rack Connection Cable (IC200CBL600)
VersaMax
CPU or NIU
Serial Port
16-PIN
MALE
2-8 VersaMax® Modules, Power Supplies, and Carriers User's Manual – March 2003
VersaMax PLC or NIU I/O Station Main Rack
IC200CBL600
PIN
1 0V
16 15
2 T_IOCLK
3 T_RUN
6 T_IODT_
9 T_RERR
10 T_RIRQ_
12 T_FRAME
16 T_RSEL
2 1
14 0V
16-PIN
FEMALE
PS
CPU/NIU
VersaMax Expansion Rack
PS
ERM
PIN
4 SINGLE_
7 0V
22 T_IOCLK
14 T_RUN
18 T_IODT_
15 T_RERR
11 T_RIRQ_
10 T_FRAME
19 T_RSEL
23 0V
1 SHIELD
1 M
Expansion
Receiver
IC200ERM002
Receiving
Port
26-PIN 26-PIN
MALE FEMALE
GFK-1504K