GE VersaMax Manual page 334

Module Specifications
Module Characteristics
Channels
Module ID
Isolation:
User input to logic (optical) and to
frame ground
Group to group
Channel to channel
LED indicators
Backplane current consumption
External power supply
Thermal derating
Configuration parameters
Diagnostics
Input Characteristics
Input voltage
Input Impedance
Accuracy at:
Resolution
Filter response (3dB Corner Freq)
Update rate per module
Compatibility
VersaPro Software
VersaMax PLC CPU Firmware
VersaMax Ethernet NIU Firmware
VersaMax DeviceNet, Profibus, or
Genius NIU Firmware
*
In the presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy may be degraded to +/-2%.
GFK-1504K Chapter 10 Analog Input Modules
Analog Input Module, 15 Bit Voltage 15 Channels
25 degrees C*
0 to 60 degrees C
15 single ended, one group
FFFFB00F
250VAC continuous; 1500VAC for 1 minute
Not applicable
None
OK LED. See "LED Indicators" for description.
5V output: 150mA maximum
None
None
None
Loss of Internal Power
A/D conversion malfunction greater than 6% of full scale
-10V to +10V
100K Ohms minimum
+/-0.3% typical of full scale, +/-0.5% maximum of full scale
+/-1% maximum of full scale
+/- 15 bits
0.3125mV = 1 count
32 Hz +/-20%
7.5ms
Version 2.0 or higher
Version 2.10 or higher
Version 1.10 or higher
Planned for future release
10
IC200ALG263
10-37