GE VersaMax Manual page 394

Analog Output Module, 16 Bit Voltage/Current, 1500VAC Isolation, 4 Channels
Module Specifications
Module Characteristics
Channels
Module ID
Isolation:
User input to logic (optical) and to
frame ground,
Group to Group
Channel to channel
LED indicators
Backplane current consumption
External power supply:
Range
Current consumption
Thermal derating
Diagnostics
Output Characteristics
Output operating range
Accuracy at 25 degrees C
Temperature coefficient
Load characteristics
Analog Resolution (1LSB)
Update rate per module
Channel-to-channel crosstalk
rejection
Output default
GFK-1504K Chapter 11 Analog Output Modules
4 outputs
FFFF9805
250VAC continuous; 1500VAC for 1 minute
Not applicable
250VAC continuous; 1500VAC for 1 minute
FLD PWR LED indicates the presence of both
logic power and user power. OK LED indicates
module status.
5V output: 10mA maximum.
3.3V output: 115mA maximum
+19.5 to +30VDC including ripple
100mA maximum plus load currents
None
High/Low Limit, Over/Underrange, Open Wire,
Loss of Field Power Supply, Non-volatile memory
fault
Current mode: +4 to 20mA
Voltage mode: +/-10VDC
+/- 0.1% maximum of full scale
Current mode: 45ppm/°C typical, 90 ppm/°C
maximum
Voltage mode: 30ppm/°C typical, 60 ppm/°C
maximum
Current mode: 0 to 1250 ohms
Voltage mode: 2K ohms minimum
Current mode: 381 nA nominal
Voltage mode: 381 µV nominal
7ms maximum
70dB minimum
Hold Last State (default)
0 (configurable)
11
IC200ALG331
11-49