Accessories; Optional Accessories - GRAPHTEC gl7000 User Manual

CHAPTER 4 Specification

4.6 Accessories

Optional Accessories

Item
Sync cable for GL7000
Probe for logic/pulse
BNC-BNC cable
BNC-Banana cable
BNC-Alligator cable
Safe probe
Insulated BNC-BNC cable
Insulated BNC-Banana cable
Alligator clip (small) *
Alligator clip (Middle) *
Grabber Clips*
2
Input/output cable for GL
Humidity sensor*
Humidity sensor power box
M3 screws with flat washers
Shunt resistance 250Ω
DSUB-Screw terminals conversion
connector
DSUB-NDIS conversion cable
SMA-BNC conversion cable
Extra fine K-type thermocouple
(TC200/TD1000), 5 per set
Needle-shape K-type thermocouple
Stationery-surface K-type
thermocouple
L-type stationery-surface K-type
thermocouple
*
1: Allowable temperature range: -25 to +80ºC
*2: One each for red and black, Connect to RIC-143
4-20
B-559
RIC-10
RIC-112
RIC-113
RIC-114
RIC-141A
RIC-142
RIC-143
RIC-144A
2
RIC-145
2
RIC-146
B-513
B-530
1
B-542
B-543
B-551
B-560
B-561
B-562
ST-55K-TC-
1.2M
RIC-410
RIC-420
RIC-430
Model
Sync cable between devices
4ch input (Set of alligator clip and IC clip)
1.5 m, 60VDC or less
1.5 m, 60VDC or less
1.5 m, 60VDC or less
1:1 42pF, Length 1.2 m, 300VDC, CAT II
Length 1.5 m, 1000 VDC, CAT II
Length 1.6 m, 600 VDC, CAT II
Aperture: 11 mm, 300 VDC, CAT II, MAX15A
20 mm, 1000 VDC, CAT III, MAX32A
Aperture: 5 mm, 1000 VDC, CAT III, MAX1A
2 m, Bare tips
3 m, With a dedicated power connector
Humidity sensor, 10-wiring, Built to order
60 pcs.
250Ω, Rated power of 1W, Maximum service voltage of 15.8
V, Built to order
DSUB connecting conversion connector for DC Strain
Module
DSUB-NDIS conversion cable for DC Strain Module only
SMA-BNC conversion cable (2 m) for Voltage Output Module
Tip wire _0.127, 0.5 x 0.7 x 200 mm, Relay section 1 m, 5
per set
-100 to 300°C, Class 1, Cord length: 1.1 m
-30 to 400°C, Class 2, Cord length: 1.1 m
-30 to 600°C, Class 2, Cord length: 1.1 m
Description