GRAPHTEC gl7000 User Manual page 167

•
If a message window is displayed, please follow the instructions in the window and change the measured values.
•
The scaling function is calculated from the ratio of the measured values and output value. If it becomes a replacement
value that cannot be processed by the GL7000 ++++/---- is shown on the digital display.
•
Depending on the scaling setting contents, the span may change.
•
If the input is temperature, its set to the input value offset setting.
Set example: When the input is voltage
Measured
values
Upper limit
+5.000
value
Lower limit
-5.000
value
+5 V
CH.1 10V
-5 V
Set example: When the input is pulse
Measured EU output
values value
1000 800
1000
CH.1
0
(11)-5 Annotation
Sets the annotation(comment) to be displayed on the CH. The maximum number of characters of each string
is 31.
Possible characters for input are kana, alphanumeric characters and symbols.
(For details on entering characters, refer to "(2) Enter a character" on page 3-26)
(11)-6 Span
Sets the upper and lower limit values for the waveform display span.
EU output
Decimal
value
+20.00
+xx.xx
-20.00
+20.00 rpm
CH.1 Scaling 1
-20.00 rpm
Decimal Unit
+xx.xx rpm
800
CH.1 Scaling 1
0
Set example: When the input is temperature
Measured
Unit
values
22.0ºC
rpm
The set value is already 3ºC plus.
CHAPTER 3 Measure and Set
EU output
value
25.0ºC
3-101