GRAPHTEC gl7000 User Manual page 145

<Voltage/Temperature Module (GL7-M)>
Item select
(11)-1 Input
(11)-2 Range
(11)-3 Filter
(11)-4 Scaling [Voltage]
[Temperature] Scaling
(11)-5 Annotation
(11)-6 Span
(11)-7 Program
(11)-8 Misc
* Pt1000: IEC751 compatible
(11)-1
(11)-2
(11)-3
(11)-4
(11)-5
(11)-6
(11)-7
(11)-8
DC
TEMP
Scaling
Meas. Upper limit value Numerical entry
Value
Lower limit value Numerical entry
Scal. Upper limit value Numerical entry
Value
Lower limit value Numerical entry
Decimal point
Select Categories
Unit selection
Unit
Adjust Meas. Value
Scal. Value
Read current
Select Categories
Unit selection
Unit
Upper limit value
Lower limit value
Inter-Ch Op.
Operation
Scaling
Span Upper level
Lower level
Decimal point
Select Categories
Unit
Unit selection
Unit
Waveform color setting
Thickness setting
Perform auto zero ADJ.
Reset auto zero ADJ.
Examples of item
Off, DC, TEMP, RH
20/50/100/200/500mV, 1/2/5/10/20/50V, 1-5V
TC-K, TC-J, TC-T, TC-R, TC-E, TC-B, TC-S, TC-N, TC-W,
Pt100, JPT100, Pt1000
Off, 2 to 5, 10, 20, 40
Off, On
+1.0000, +10.000, +100.00, +1000.0, +10000
Current, Length, Area, Volume, Acceleration, Frequency,
Mass, Energy, Pressure, Flow, Temperature, Strain
(Item selection changes depending on the groups mentioned above)
The above unit selection result or character entry
Off, On
Numerical entry
Numerical entry
Reflects the current measured values
Current, Length, Area, Volume, Acceleration, Frequency,
Mass, Energy, Pressure, Flow, Temperature, Strain
(Item selection changes depending on the groups mentioned above)
The above unit selection result or character entry
Text input (up to 31 characters)
Numerical entry
Numerical entry
Off, On
CH-X (Function) CH-Y
CH-X : CH1 to CH112
Function : Four arithmetic operations (+, –, ×, ÷)
CH-Y : CH1 to CH112
/1000000, /1000, ×1, ×1000, ×1000000
–100000 to +100000 (Enter a number)
–100000 to +100000 (Enter a number)
+1.0000, +10.000, +100.00, +1000.0, +10000
Current, Length, Area, Volume, Acceleration, Frequency,
Mass, Energy, Pressure, Flow, Temperature
(Item selection changes depending on the groups mentioned above)
The above unit selection result or character entry
Red, Green, Blue (RGB) Each color 0 to 31
1 to 8dots
Execute
Execute
CHAPTER 3 Measure and Set
3-79