I/F, Usb Settings - GRAPHTEC gl7000 User Manual

CHAPTER 3 Measure and Set

(6) I/F, USB settings

Sets the conditions for connecting to a computer. Ethernet settings are set in the network settings, a different
menu.
("Home" "Machine"
Item select
(6)-1 New line Code
(6)-2 USB ID
(6)-3 USB Drive mode select
(6)-1 New line Code
Sets the lower line character for managing with I/F commands.
Item select
CR+LF
LF
CR
(6)-2 USB ID
Sets the USB ID number for the GL7000.
It can be set between 0 and 9.
When managing multiple machines with 1 computer, please set the USB IDs so that they do not overlap.
(6)-3 USB Drive mode select
Sets the USB Drive Mode destination for the GL7000.
May be set from the built-in flash memory, SD card, SSD (when the SSD module is mounted).
Please see page 3-41 "USB Drive Mode".
3-68
"I/F, USB settings")
CR+LF, LF, CR
0 to 9
Internal FLASH, SD Card, SSD Module
Line break with CR/LF
Line break with LF
Line break with CR
(6)-1
(6)-2
(6)-3
Examples of item
Description