GRAPHTEC gl7000 User Manual page 181

Item select
(15)-9 XY display settings
(15)-10 FFTdisplay Frequency
settings
Number of analysis points
Time window
Average mode
Average
count
Display
settings
Calculation
settings
Trace Execute
X-Axis CH1 to CH112
Y-Axis CH1 to CH112
Color Red, Green, Blue (RGB) Each color 0 to 31
0.08, 0.2, 0.4, 0.8, 1.6, 2, 3.2, 4, 8, 20, 40, 80, 200, 400, 800 Hz,
2, 4, 8, 20, 40, 80, 200, 400 kHz"
500, 1000, 2000, 4000, 10000
Rectangular, Hanning, Hamming, Blackman, Flattop, Exponential
Off, Summation, Exponential, Peak hold
Automatic
Optional Enter the number. (Lower limit value: 2, Upper limit value: 9999)
Display format 1-divided, 2-divided, Nyquist
Grid Off, On
Zone Zone1, Zone2 (Displayed with the settings of Zone1 and Zone2)
Function Y-T, Linear, Power, PSD, Cross, TRF, Coherence, COP
X Axis Linear, Log
X Axis function Frequency, Cycle
Y Axis Linear, Log, Phase
Y Axis auto scale Off, On
Trace Settings of 1 to 4 types
Trace Off, On
CH A Selection of the calculation channel
CH B Selection of the calculation channel
Waveform Selection of the combination of Red, Green and Blue
color
Zone Zone1, Zone2 (Displayed with the settings of Zone1 and Zone2)
CH Settings of 1 to 4 types
Calculation
CH A None, Differential, D-Differential, Integral, D-Integral
Calculation
CH B None, Differential, D-Differential, Integral, D-Integral
Calculation
RMS Off, On
Smoothing Off (The setting range of the smoothing varies depending on the
analysis frequency.)
CHAPTER 3 Measure and Set
Examples of item
3-115