Device Control Block (Mks-8031Tb Trackball Module, Option) - Sony MVS-8000SF User Manual

Device Control Block (MKS-8031TB Trackball Module,
Option)
The description below of frame memory
clip operations applies only to the MVS-
8000A/8000G.
The device control block is used for three-
dimensional transform operations using a
5 MENU button
a Region selection buttons
The operation mode allocated to the device
control block depends on the selection state
of the region selection buttons.
When the [M/E 1], [M/E 2], [M/E 3], and
[P/P] buttons are selected: This
enables the wipe pattern position
setting (positioner) operation mode in
the device control block. You can
select multiple buttons simultaneously.
When the MKS-9011 1M/E Control
Panel is used, only the [P/P] is enabled.
DME, for wipe pattern position setting, and
for VTR/disk recorder or frame memory
clip operations.
1 Region selection buttons
2 Operating buttons
4 Z-ring
When the MKS-9012 2M/E Control
Panel is used, only the [M/E-1] and [P/
P] are enabled.
When the [USER] button is selected: This
enables pattern position setting used
for color backgrounds.
When the [DME 1] to [DME 8] buttons
are selected: This enables the three-
dimensional transform operation mode
in the device control block.
Press a button, turning it on, to select a
DME channel. You can select multiple
Names and Functions of Parts of the Control Panel
3 Trackball
77