Table of Contents
Advertisement
9. Troubleshooting
When a Message Appears While Using the
Printer Function
• When confirming or changing the settings in [Settings], press [Home] (
Messages that Appear without Error Codes
Message
"Address Book is
currently in use by
another function.
Authentication has
failed."
"A job via the
network that was not
printed exists
because an error
occurred. It was
stored as a job not
printed."
"All the remaining
print volume has
been allocated to
another central
managed client(s).
The job has been
cancelled."
"An error occurred
while printing a job
with Background
Numbering. The job
has been
cancelled."
248
Cause
The address book is
Try again later.
in use by another
function, and
authentication
query is not
possible.
When the error job
• Check that the machine is connected to the
storing function is
enabled, an error
occurred in the print
• The stored document can be printed.
job sent via the
network and the
canceled job was
stored.
The job was
All job slots are occupied by other devices. Check the
canceled because
status of the client machine.
the usage count
information could
not be obtained
from the Central
Management
machine.
A size that is
Specify a size smaller than 216.0 mm (8.5 inches) wide
impossible to print
and 356.0 mm (14.0 inches) long in "Print On:" in the
was specified.
printer driver. When [Same as Original Size] is
specified in "Print On:", reduce the size specified in
"Print On:" or adjust the size in the application.
Solution and reference
network correctly. For details about your network
environment, consult the network administrator.
page 141 "Printing Documents Stored in the Printer
from the Control Panel"
) after closing [Settings].
Advertisement
Table of Contents
