Funkwerk R1202 Reference Manual page 196

13 Wireless LAN Controller
182
In the Wireless LAN Controller->Maintenance->Firmware Maintenance menu, a list of
all Managed Access Points is displayed.
For every access point, you see an entry with a parameter set (Update firmware, Loca-
tion, Device, IP Address, MAC Address, Firmware Version , Status).
Possible values for Status
Status
Image already exists.
Error
Running
Done
The Wireless LAN Controller->Maintenance->Firmware Maintenance menu consists of
the following fields:
Fields in the Firmware Maintenance menu
Field
Action
Source Location
Funkwerk Enterprise Communications GmbH
Meaning
The software image already exists; no update is required.
An error has occurred.
The operation is currently in progress.
The update is complete.
Description
Select the action you wish to execute.
After each task, a window is displayed showing the other steps
that are required.
Possible values:
•
of the system software.
•
can save a configuration which contains the AP status inform-
ation.
Select the source for the action.
Possible values:
• (default value): The file is stored respectively
on a remote server specified in the URL.
•
on the official Funkwerk update server. (Only for Action=
• : The file is stored respectively on a TFTP
server specified in the URL.
: You can also start an update
: The file is
)
bintec Rxxx2/RTxxx2
: You