Brrp - Funkwerk R1202 Reference Manual

21 Local Services
474
Local Services
Fig. 187: ->
The Local Services->HotSpot Gateway->Optionsmenu consists of the following fields:
Fields in the Basic Parameters menu
Field
Host for multiple loca-
tions

21.12 BRRP

In the BRRPmenu you can configure the redundancy of your gateway.
Note
You require a licence for devices in the R23x series and RS series.
BRRP (Bintec Router Redundancy Protocol) is a Bintec-specific implementation of the
VRRP (Virtual Router Redundancy Protocol). A router redundancy procedure is used
mainly to safeguard the availability of a physical gateway in a LAN or WAN.
Terms and Definitions
A number of special terms are used to describe the functionality. The following terms are
defined in the relevant RFC and in the Internet draft.
BRRP terms
Field
VRRP router
Virtual Router
Funkwerk Enterprise Communications GmbH
HotSpot Gateway Options
->
Description
If several locations (branches) are set up on the Hotspot server,
enter the value of the NAS identifier (RADIUS server parameter)
that has been registered for this location on the Hotspot server.
Description
"A router that uses the Virtual Router Redundancy Protocol. It
can be integrated into one or more "virtual routers" . "
"An abstract object controlled by the VRRP, which is used as
default router for the hosts of a LAN. It comprises a Virtual
bintec Rxxx2/RTxxx2