Funkwerk R1202 Reference Manual page 459

Funkwerk Enterprise Communications GmbH
bintec Rxxx2/RTxxx2
Field
Monitored Interface
Interface Status
Traffic Direction
Interface Traffic Condi-
tion
Transferred Traffic
Destination IP Address
Source IP Address
Description
Only for Event Type
Select the interface whose defined status shall trigger an opera-
tion.
Only for Event Type
Select the status that the interface must have in order to initiate
the intended operation.
Possible values:
• (default value): The function is enabled.
• : The interface is disabled.
Only for Event Type
Select the direction of the data traffic whose values should be
monitored as initiating an operation.
Possible values:
• (default value): Incoming data traffic is monitored.
• : Outgoing data traffic is monitored.
Only for Event Type
Select whether the value for data traffic must be
(default value) or the value specified in
in order to initiate the operation.
Only for Event Type
Enter the desired value in kBytes for the data traffic to serve as
comparison.
The default value is .
Only for Event Type
Enter the IP address whose accessibility is to be checked.
Only for Event Type
21 Local Services
and
445