General - Funkwerk R1202 Reference Manual

21 Local Services
468
Field
Interface is UPnP con-
trolled

21.10.2 General

In this menu, you make the basic UPnP settings.
Local Services
Fig. 184: ->
The Local Services->UPnP+Generalmenu consists of the following fields:
Fields in the General menu
Field
UPnP Status
UPnP TCP Port
Funkwerk Enterprise Communications GmbH
Description
Determine whether the NAT configuration of this interface is
controlled by UPnP.
The function is enabled with
The function is enabled by default.
UPnP General
+
Description
Decide how the gateway processes UPnP requests from the
LAN.
The function is enabled with
with UPnP releases in accordance with the parameters con-
tained in the request from the LAN UPnP client, independently
of the IP address of the requesting LAN UPnP client.
The function is disabled by default. The gateway rejects UPnP
requests, NAT releases are not made.
Enter the number of the port on which the gateway listens for
UPnP requests.
The possible values are
.
. The gateway proceeds
to , the default value is
bintec Rxxx2/RTxxx2
.