Interface-Specific States - Funkwerk R1202 Reference Manual

24 Monitoring
524
Field
Uptime
Upstream Join Timer
Shortest Path Tree
Values in the (S,G,RPT) States list
Field
Multicast Group Ad-
dress
Source IP Address
Reverse-
Path-Forwarding (RPF)
Uptime
Upstream Override
Timer

24.9.3 Interface-Specific States

The menu Monitoring+PIM+Interface-Specific States includes interface-specific status
information.
Funkwerk Enterprise Communications GmbH
Description
entry. This corresponds to the status of the Upstream (S,G)
State Machine in the PIM-SM specification.
Indicates the timespan since the entry was generated by the
local router.
Indicates the remaining time until the local router sends out the
next periodic (S,G) Join message on pimSGRPFIfIndex. In the
PIM-SM specification, this timer is named (S,G) Upstream Join
Timer. If the timer is deactivated, it has the value .
Indicates whether the Shortest Path Tree Bit is set, i.e. whether
forwarding via the Shortest Path Tree should take place.
Description
Displays the multicast group address. InetAddressType is
defined in the pimStarGAddressType object.
Displays the source IP address. InetAddressType is defined in
the pimStarGAddressType object.
Indicates the address type of the RPF Next Hop to the RP, or
unknown(0), if the RPF Next Hop is not known.
Indicates the timespan since the entry was generated by the
local router.
Indicates the remaining time until the local router sends out the
next Triggered (S,G, rpt) Join message on pimSGRPFIfIndex. In
the PIM-SM specification, this timer is named (S,G, rpt) Up-
stream Override Join Timer. If the timer is deactivated, it has the
value .
bintec Rxxx2/RTxxx2