Adsl Interface - Funkwerk R1202 Reference Manual

6 Technical data
38
Pin
2
3
4
5
6
7
8
The Ethernet 10/100/1000 BASE-T interface does not have an Auto-MDI-X function.

6.5.3 ADSL interface

The ADSL interface on bintec R3002 and RT3002 is connected via an RJ45 plug. The
cable supplied connects the RJ45 plug needed for the device to an RJ11 plug provided for
Annex A. The second cable supplied connected the RJ45 plug with an RJ45 plug for Annex
B.
The following pins are used for the ADSL connection:
Fig. 13: ADSL interface (RJ45 socket)
The pin assignment for the ADSL interface (RJ45 socket) is as follows:
RJ45 socket for ADSL connection bintec R3002 and RT3002
Pin
1
2
3
4
5
6
7
8
Funkwerk Enterprise Communications GmbH
Function
Pair 0 -
Pair 1 +
Pair 2 +
Pair 2 -
Pair 1 -
Pair 3 +
Pair 3 -
Function
Not used
Not used
Not used
Line 1a
Line 1b
Not used
Not used
Not used
bintec Rxxx2/RTxxx2