Options - Funkwerk R1202 Reference Manual

10 System Management
108

10.5.3 Options

This setting possible here causes your device to carry out authentication negotiation for in-
coming calls, if it cannot identify the calling party number (e.g. because the remote terminal
does not signal the calling party number). If the data (password, partner PPP ID) obtained
by executing the authentication protocol is the same as the data of a listed remote terminal
or RADIUS user, your device accepts the incoming call.
System Management
Fig. 41:
The menu System Management->Remote Authentication->Options consists of the fol-
lowing fields:
Fields in the Global RADIUS Options menu
Field
Authentication for PPP
Dialin
Funkwerk Enterprise Communications GmbH
Remote Authentication
->
Description
By default, the following authentication sequence is used for in-
coming calls with RADIUS: First CLID, then PPP and then PPP
with RADIUS.
Options:
• : Only inband RADIUS requests (PAP,CHAP, MS-
CHAP V1 & V2) (i.e. PPP requests without CLID) are sent to
the RADIUS server defined in Server IP Address.
• : Only outband RADIUS requests (i.e. re-
quests for calling line identification = CLID) are sent to the
RADIUS server.
is activated by default.
Options
->
bintec Rxxx2/RTxxx2