Funkwerk R1202 Reference Manual page 152

Table of Contents

11 Physical Interfaces

MSN Recognition

Bearer Service

Funkwerk Enterprise Communications GmbH

Select the ISDN port for which the MSN is to be configured.

Select the service to which a call is to be assigned on the MSN

Possible values:

(default value): Enables login with

: Default setting for PPP routing. Contains

automatic detection of the PPP connections stated below ex-

: Enables a number to be defined for IPSec callback.

: Other services can be selected:

(Allows 64 kpbs PPP data connections),

kpbs PPP data connections),

(Allows PPP connections with V.110 and bitrates of 9,600

bps, 14,400 bps, 19,200 bps, 38,400 bps),

(Allows PPP connections with V.120).

Enter the number used to check the called party number. For

the call to be accepted, it is sufficient for the individual numbers

in the entry to agree, taking account of MSN Recognition.

Select the mode your device is to use for the number comparis-

on for MSN with the called party number of the incoming call.

Possible values:

(default value)

nected to a point-to-point connection.

Select the type of incoming call (service detection).

Possible values:

(default value): Both data and voice calls.

: Voice call (modem, voice, analog fax)

: Always select if your device is con-

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents