Funkwerk R1202 Reference Manual page 297

Funkwerk Enterprise Communications GmbH
bintec Rxxx2/RTxxx2
Field
Fields in the Bandwith on Demand Options menu
Field
Channel Bundling
Description
•
mediately when requested to do so by the connection part-
ner.
•
period of time suggested by the Microsoft client (NT: 10
seconds, new systems: 12 seconds. It uses the call number
(Entries->Call Number) with the Mode
entered for the connection partner. If no number is entered,
the required number can be reported by the caller in a PPP
negotiation. This setting should be avoided where possible
for security reasons. Currently cannot be avoided for the
connection of mobile Microsoft clients via DCN.
•
prox. four seconds if your device is requested to do so by
the connection partner. Only makes sense for CLID.
•
This setting should be avoided for security reasons. The Mi-
crosoft client also has the option of aborting callback and
maintaining the initial connection to your device without call-
back. This only applies if no fixed, outgoing number has
been configured for the connection partner. This is done by
closing the dialog box that appears with Cancel.
Description
Select whether channel bundling is to be used for ISDN connec-
tions with the connection partner, and if so, what type.
Your device supports dynamic and static channel bundling for
dialup connections. Only one B-channel is initially opened when
a connection is set up. Dynamic channel bundling means that
your device connects other ISDN B channels to increase the
throughput for connections if this is required, e.g. for large data
rates. If the amount of data traffic drops, the additional B-
channels are closed again. In static channel bundling, you spe-
cify right from the start how many B-channels your device is to
use, regardless of the transferred data rate.
Possible values:
: Your device calls back im-
: Your device calls back after a
: Your device calls back after ap-
with the option of termination.
17 WAN
or
: like
283