Funkwerk R1202 Reference Manual page 83

Funkwerk Enterprise Communications GmbH
bintec Rxxx2/RTxxx2
Menu
VDSL
LAN
Menu
IP Configuration
VLAN
Wireless LAN Controller
Menu
Wizard
Controller Configura-
tion
Slave AP configuration In this menu, you configure the slave access points.
Monitoring
Maintenance
Networking
Menu
Routes
NAT
Load Balancing
QoS
Access Rules
Drop In
Function
Only for R3502 and RT3502.
In this menu, you configure the VDSL interface of your device.
Function
In this menu, you carry out the IP configuration of the LAN inter-
faces for your device.
In this menu, you configure the VLANs.
Function
The Wizard helps you to set up a WLAN infrastructure.
In this menu, you make the basic wireless LAN controller set-
tings.
In this menu, you can monitor active and neighbouring clients.
In this menu, you can update access point software and save
any configurations.
Function
In this menu, you enter additional routes.
In this menu, you configure the NAT firewall (NAT, Network Ad-
dress Translation).
In this menu, you configure application-controlled bandwidth
management.
In this menu, you configure all the "Quality of Service" settings.
In this menu accesses to data and functions are restricted.
In this menu you can separated interfaces from one another lo-
8 Access and configuration
69