Funkwerk R1202 Reference Manual page 172

13 Wireless LAN Controller
158
13.1.3 Wireless Networks
All of the configured wireless networks (VSS) are displayed in the list. At least one wireless
network (VSS) is set up. This entry cannot be deleted.
Click on to edit an existing entry.
You can also delete entries with the aid of
With Add, you can create new entries. You can create up to eight wireless networks (VSS)
for a wireless module.
Note: If you wish to use the default wireless network that is set up, you must at least
change the Preshared Key parameters. Otherwise you will be prompted.
13.1.3.1 Change or add wireless networks
Click on to edit an existing entry.
With Add, you can create new entries.
The following parameters are available
Network Name (SSID)
Enter the name of the wireless network (SSID).
Enter an ASCII string with a maximum of 32 characters.
Also select whether the Network Name (SSID)
Security Mode
Select the security mode (encryption and authentication) for the wireless network.
Note:
Transmit Key
Enter a transmission key for Security Mode =
Select one of the keys configured in WEP Key <1-4>as standard key.
WEP Key <1 -4 >
Enter a WEP key for Security Mode =
Funkwerk Enterprise Communications GmbH
.
means 802.11x.
or
is to be transmitted.
or .
.
bintec Rxxx2/RTxxx2