Pim; Pim Interfaces - Funkwerk R1202 Reference Manual

Funkwerk Enterprise Communications GmbH
bintec Rxxx2/RTxxx2
Field
Multicast Group Ad-
dress
Source Interface
Destination Interface

16.4 PIM

Protocol Independent Multicast (PIM) is a multicast-routing process that makes possible
dynamic routing from multicast packets. With PIM the distribution of information is regu-
lated via a central point, which is known as the rendezvous point. Data packets are initially
routed here before being made available to other recipient routers.
Multicast routing protocols differentiates between sparse mode and dense mode. In dense
mode, all packets are forwarded and only packets to groups that have been explicitly can-
celled are rejected. In sparse mode, packets are only forward to groups if they have been
ordered. Your device uses PIM in sparse mode.

16.4.1 PIM Interfaces

A list of all PIM interfaces is displayed in the Multicast->PIM->PIM Interfaces menu.
Multicast PIM
Fig. 105: -> ->
Description
The option is deactivated by default.
Only for All Multicast Groups = not active.
Enter here the address of the multicast group you want to for-
ward from a defined Source Interface to a defined Destination
Interface.
Select the interface on your device to which the selected multic-
ast group is sent.
Select the interface on your device to which the selected multic-
ast group is to be forwarded.
PIM Interfaces
16 Multicast
253