Funkwerk R1202 Reference Manual page 314

17 WAN
300
Field
Peak Cell Rate (PCR)
Sustained Cell Rate
(SCR)
Funkwerk Enterprise Communications GmbH
Description
Possible settings:
•
(Unspecified Bit Rate) A particular data rate is not guaranteed
for the connection. The Peak Cell Rate (PCR) specifies the
limit above which data is discarded. This category is suitable
for non-critical applications.
•
nection is assigned a guaranteed data rate determined by the
Peak Cell Rate (PCR). This category is suitable for critical
(real-time) applications that require a guaranteed data rate.
•
The connection is assigned a guaranteed data rate ( Sus-
tained Cell Rate (SCR) This may be exceeded by the volume
configured in Maximum Burst Size (MBS). Any additional
ATM traffic is discarded. The Peak Cell Rate (PCR) consti-
tutes the maximum possible data rate. This category is suit-
able for non-critical applications with burst data traffic.
•
The connection is assigned a guaranteed data rate ( Sus-
tained Cell Rate (SCR) This may be exceeded by the volume
configured in Maximum Burst Size (MBS). Additional ATM
traffic is marked and handled with low priority based on the
utilisation of the destination network, i.e. is discarded if neces-
sary. The Peak Cell Rate (PCR) constitutes the maximum
possible data rate. This category is suitable for critical applica-
tions with burst data traffic.
Enter a value for the maximum data rate in bits per second.
Possible values: to
The default value is .
Only for ATM Service Category =
or
Enter a value for the minimum available, guaranteed data rate
in bits per second.
Possible values: to
The default value is .
(default value):
: (Constant Bit Rate) The con-
: (Variable Bit Rate)
: (Variable Bit Rate)
.
.
bintec Rxxx2/RTxxx2