Wireless Networks (Vss) - Funkwerk R1202 Reference Manual

13 Wireless LAN Controller
174
Field
Long Retry Limit
Fragmentation
Threshold

13.3.3 Wireless Networks (VSS)

Wireless LAN Controller
Fig. 66:
An overview of all created wireless networks is displayed in the Wireless LAN Controller-
>Slave AP configuration->Wireless Networks (VSS) menu. A wireless network is cre-
ated by default.
For every wireless network (VSS), you see an entry with a parameter set (VSS Descrip-
tion, Network Name (SSID), Number of associated radio modules, Security, Status,
Action).
Under Assign unassigned VSS to all radio modules click on the Startbutton to assign a
newly-created VSS to all wireless modules.
Funkwerk Enterprise Communications GmbH
Description
Possible values are to
The default value is .
Enter the maximum number of attempts to send a data packet
of length greater than the value defined in RTS Threshold.
After this many failed attempts, the packet is discarded.
Possible values are to
The default value is .
Enter the maximum size as of which the data packets are to be
fragmented (i.e. split into smaller units). Low values are recom-
mended for this field in areas with poor reception and in the
event of radio interference.
Possible values are to
The default value is
Slave AP configuration
->
.
.
.
.
Wireless Networks (VSS)
->
bintec Rxxx2/RTxxx2