Funkwerk R1202 Reference Manual page 84

8 Access and configuration
70
Menu
Routing Protocols
Menu
RIP
OSPF
Multicast
Menu
General
IGMP
Forwarding
OSPF
WAN
Menu
Internet + Dialup
Leased Line
Real Time Jitter Con-
trol
VPN
Menu
IPSec
L2TP
PPTP
Funkwerk Enterprise Communications GmbH
Function
gically without abandoning the entire network.
Function
In this menu, you configure the dynamic updating of the routing
table via RIP.
In this menu all global and interface-specific OSPF settings are
performed.
Function
In this menu, you enable or disable multicast routing.
In this menu, you configure the interfaces on which IGMP is to
be enabled.
In this menu, you specify which multicast groups are always
passed between the interfaces of your device.
In this menu, you can switch PIM functions on and off.
Function
In this menu, you define the Internet connections for the various
connection protocols or dialup connections.
In this menu, the permanent connections of two communication
partners are displayed.
In this menu, you can set the upstream speed.
Function
In this menu, you configure VPN connections over IPSec.
In this menu you configure the use of L2TP (Layer 2 Tunnelling
Protocol).
In this menu, you configure the an encrypted PPTP tunnel.
bintec Rxxx2/RTxxx2